HiTEC® 5710

Dispersant Polymethacrylate Viscosity Index Improver
Current region availability Asia Pacific Europe, Middle East, Africa, India (EMEAI) Latin America North America
To inquire about availability in other regions or to find out more contact your Afton Representative.
Download Product Data Sheet Request Safety Data Sheet

Key Performance Benefits

HiTEC® 5710 additive benefits include:

  • The right shear stability to maximize performance and minimize cost in ATF, tractor and other applications
  • Facilitates the flexibility to use Group I or II base oils in many applications
  • Adds cleanliness properties which may reduce the overall cost of the formulation by lowering the dosage of additional dispersants
  • Exceptional low temperature properties even after the lubricant has been subject to oxidation
  • Used by OEMs in factory fill applications
  • Good handling characteristics

Application

AHiTEC® 5710 Viscosity Index Improver is based on dispersant polymethacrylate (PMA) chemistry and is recommended for a range of applications where low temperature properties and shear stability are important. In addition, HiTEC® 5710 additive provides dispersancy which benefits oxidation and cleanliness properties of the lubricant. HiTEC® 5710 additive is particularly suited to automatic transmission fluids and tractor hydraulic fluid formulations. 

Aviation turbine fuel produced against the DefStan 91-091 specification requires a conductivity of between 50 pS/m and 600 pS/m. Only aviation approved static dissipater additives such as AvGuard™ SDA can be used to achieve this.

Recommended Dosage

Please contact your Afton Chemical representative for specific recommendations.

Typical Characteristics

Handling Information

Max Short Term Handling Temp: 100˚C
Shelf Life: 36 months @ ambient temperature

Formulation Examples

Tractor Formulation Example



ATF Formulation Example